Roofing Solutions NW LLC Specializes in Installing and Servicing Flat Roofing and Low Sloped Roofs

Duro-Last Flat Roofing Systems
  • large-building-reduced
  • factory_welds-reduced

Benefits of a Flat Roof from Roofing Solutions NW LLC

Flat Roofing or Low Sloped roofs have little to no slope and a very slight angle. This type of roof offers many benefits including cost, accessibility and safety. This type of roof is typically used in commercial properties but can be seen in residential roofs as well.

Low sloped roofs are roofs with a pitch less than 4:12. It is highly recommended that for flat roofing or low sloping roofs, a continuous membrane system is used to cover them. Roofing Solutions NW LLC recommends duro1 Duro-Last for a custom-prefabricated, reinforced, thermoplastic single-ply roofing system. This system is recommended by Roofing Solutions NW LLC for any commercial roofing application.

5 Reasons Why Building Owners Choose Roofing Solutions NW


FreeImage-11When access to your building is disrupted, it costs you time and money. That’s where prefabrication really sets Roofing Solutions NW LLC apart. Because the flat roofing system we use for most commercial roofs is precision fabricated in a factory controlled environment, it goes on faster with less waste. Installation is quiet and safe, with no loud machinery or noxious fumes to disrupt building occupants. And oftentimes, a new roof can be installed over an existing roof. That eliminates the risk of sensitive equipment or data being damaged by debris or exposure to weather, and it allows you to maintain business as usual. It may also avoid the added costs of tearing off and disposing your old roof.

Costs to Consider:

  • Installation Costs
  • Tear-off Costs
  • Disposal Costs
  • Building Disruption Costs


FreeImage-17 Roofing Solutions NW LLC chooses Duro-Last roofing because the material is resistant to fire, chemicals, grease, high winds, and punctures, and it easily accommodates wide temperature extremes. Once installed, it is virtually maintenance-free, unlike other roof materials that may require regular patching or other repairs.

Costs to Consider:

  • Regular Maintenance
  • Roof Life Expectancy

Costs to Consider:

  • Roof Repairs
  • Interior Damage Caused by Leaks


179-300x169The weakest point of any roof is where two or more pieces join together, and this is another distinct benefit of a roof from Roofing Solutions NW LLC. We use Duro-Last because Up to 85% of the seams in a Duro-Last roof are completed in a quality controlled factory environment, assuring a better seal. This eliminates nearly 100% of rooftop labor from the most critical and problematic installation points: transitions and changes in plane. The few remaining seams are completed on-site and inspected before a warranty is issued. The benefits for you include fewer leaks, problems, and repair bills over the life of your roof.

Costs to Consider:

  • Current Energy Costs
  • Expected Energy Savings
  • Rebates, Loans or Incentives for Reducing Energy Consumption


FreeImage-17The Roofing Solutions NW LLC uses materials that are highly effective in reducing energy costs. Duro-Last white membrane has the highest retained reflectivity of any single-ply membrane rated by the EPA’s ENERGY STAR® Roof Products Program. That means you can save money on cooling costs. How much you’ll save depends on your location and current energy rates as well as other factors specific to your building.

Costs to Consider:

  • Extended Warranty Costs (for Other Brands)


FreeImage-18Even the best roofing materials are only as good as the quality of the installation. That’s why Roofing Solutions NW LLC contractors are authorized contractors of Duro-Last. We are so confident in the durability of these roofing
systems. Commercial and industrial installations come with comprehensive 15-year No Dollar Limit (NDL) warranties.

Roofing system performance is a balance between film formulation, membrane thickness, and reinforcement. Roofing Solutions NW LLC doesn’t add “filler” material to increase thickness; our film is the same proven formula from top to bottom.
Layout 1Another key reason that Roofing Solutions NW LLC uses Duro-Last products is the difference in the reinforcement scrim within the membrane. It’s a weft-insertion scrim with a density of 14 x 18 threads-per-inch – among the highest in the industry.